Turn your garage into a dirty, smeary storage room, into a classy, useful addition to the house. To people of Highland Park, the garage is usually the main access point to the house, and therefore, its appearance and strength are among their main concerns. Epoxy garage floor in Highland Park, MN.
We specialize in professional-grade epoxy and polyaspartic paint at Alamtal Flooring, which can withstand the North Shore climate. This guide explains the reason why your property in Highland Park should have an epoxy garage floor as a final investment.
Why Highland Park Homeowners Choose Epoxy Flooring
Highland Park boasts elegant estates and well-maintained landscaping. But the local climatic conditions, with their freezing winters and humid summers, may be inhumane to ordinary concrete. Raw concrete is porous; it absorbs road salt, oil, and moisture, and as a result, it spalls (peels off the surface) and leaves deep-rooted stains.
1. Resistance to Road Salt and Chemicals
The winter in Illinois implies salt and brine on the roads. These are chemicals that corrode bare concrete. Alamtal Flooring has a professional epoxy coating that provides a non-porous barrier that does not allow salt to enter the epoxy coating, keeping your floor looking shiny every year.
2. Extreme Durability and Impact Resistance
Your floor must be able to take weight and impact, whether you are storing a luxury vehicle, a home gym, or a workshop. Their industrial-grade epoxy systems are harder than concrete when used on their own, can withstand the chips of dropped tools, and do not experience the hot tire pick-up, or warm tires peeling away the lower quality DIY paints.
3. Aesthetic Elevation
A garage is not only useful, but it should be gorgeous. Our lineup of decorative flake blends, including the soft greys that resemble granite, or the bright and custom palettes, is enormous and will quickly enhance your curb appeal and selling price.
4. Safety and Visibility
Our topcoats have anti-slip to make them safe even in case the floor is wet with rain or melting snow. What is also important is that the high-gloss finish reflects overhead lighting, and it makes your garage easier and safer to navigate in the dark.
The Alamtal Flooring Difference: Our 6-Step Process
A DIY kit offered at a big box store is likely to fail within the first two years due to a lack of surface preparation. We apply a strict 6-step process at Alamtal Flooring to secure a lifetime relationship.
Diamond Grinding: We mill the concrete with heavy-duty planetary grinders with the searchlights of diamond blades to open the pores of the concrete. This removes the uppermost layer of “laitance” and leaves a mechanical profile on which the epoxy can stick.
Repair and Patching: When we paint, we do not paint over fractures. Pits, divots, and spider web cracks are repaired using special polyurea fillers so that the foundation is as smooth and flat as possible.
Dust Recovery: With industrial HEPA-filtered vacuums, we take all particles of dust away. There is no bargain when it comes to a clean surface.
Basecoat Application: We use high solids basecoat, which penetrates into the concrete.
Full Flake Broadcast: With DIY kits, the sprinkling of flakes is done; however, we broadcast until we are thrown out. This is to ensure that 100 percent of the wet floor is covered with ornamental flakes to provide maximum texture and longevity.
Polyaspartic Topcoat: Our topcoat is a polyaspartic topcoat, UV stable. This coating can withstand 4 times more than average epoxy, does not yellow in the sun, and can be used by people in a few hours.
The Alamtal Flooring Difference: Our 6-Step Process
Another of the largest advantages of an Alamtal floor is its cleanability. The surface is non-porous and smooth:
Spills: Oil, antifreeze, and wine clean up using a paper towel.
Simple Cleaning: all you need is a quick sweep and a few times of mopping with a pH-neutral cleaning solution (such as Simple Green) to keep that day one polish.
No Dusting: Concrete floors, by their very nature, do generate dust. That is covered with an epoxy coating, and your cars and storage areas are cleaner.
Frequently asked questions (FAQ)
Q: How long does the installation take?
A: The floors in most residential garages in Highland Park take only a day to finish. The topcoats we are using, mainly polyaspartic, are quick curing, which means that after 24 hours, you can walk on the floor, and within 48-72 hours, you can park your car.
Q: Is epoxy different from garage floor paint?
A: Yes, significantly. Floor paint is a thin coating made of water and placed on top of the concrete, and ultimately peels away. Epoxy is a two-component resin that forms a chemical bond with the concrete, making the surface far thicker, harder, and more durable.
Q: Will the floor be slippery when wet?
A: We do have an anti-slip texture in topcoats. This gives the grip needed to walk safely, even during a winter in Highland Park when the snow is melting off your automobile.
Q: Does Alamtal Flooring offer a warranty?
A: Absolutely. Our craftsmanship and materials are in our defense. We provide a Lifetime Residential Warranty against peeling and delamination, so you have complete peace of mind.
Q: Can you coat over an existing, damaged floor?
A: In most cases, yes! The process of grinding our diamonds is used to remove the old, failing finishes, and our patching compounds are used to repair the cracks and pits that are already present. We make art out of beaned-up floors.
Ready to Transform Your Highland Park Garage?
Your garage is not a garage; it is an investment in your home, in length and style. There is no need to go with an uneven, dusty, or damaged floor; a professional solution can be provided in a phone call.
Would you have me make a free, no-obligation estimate of your home in Highland Park?
